SMART Dimmer Plus™ Controller with Daylight and PIR Occupancy Sensor

Installation and Programming Made Simple

Closed Loop Technology with Continuos Daylight Dimming


SMART Dimmer Plus Controller

with Dual Daylighting / PIR Occupancy Sensor

SMART Light Dimmer Plus can provide both Occupancy and Daylighting Controls when used with the SLS200 dual Photocell/PIR Motion sensor. The technology works with 0-10V LED and T8 commercial light fixtures. Daylighting is regulated with a user set point for the desired work area brightness. The SMART Dimmer will then adjust the light's power up and down to maintain this desired set point. If the area light level becomes greater than 150% of the set point, the lights will turn off. And when the area light drops below your desired set point the lights will turn back on and starting daylighting.

If the area is not occupied the lights can turn off or dim down to hold this dimmed set point. Some areas it makes sense to not turn the light off such as warehouses, hallways, and hotels. All set points are easily adjustable without any tools, ladders, or computers. Setup usually only take a couple minutes using our patented technology. The SMART Dimmer Plus can be locked to prevent changes to the program. See the SMART Dimmer Plus Operation document for how to configure the lights and also manually control operation.


SMART Dimmer Plus Controller with

PIR Occupancy Sensor

The SMART Dimmer Plus can provide occupancy control when used with the SLS100 PIR Occupancy Sensor. Unlike a traditional motion sensor, you can choose how bright the lights will be when on. No longer are you forced to have the lights on at 100%. Maybe 80% power is more than enough. And when the area is not occupied, you can turn the lights off or dim them down. Again, maybe the area needs some residual light for safety.

With the SMART Dimmer Plus you can choose what bright and dim settings work best for your application. The SMART Dimmer Plus can also provide two stage dimming and also vacancy control. Set points can be locked to prevent changes to the program. See the SMART Dimmer Plus Operation document for how to configure the lights and also manually control operation.


Specifications
SLP100 120-208 VAC, 1.2A, 50/60Hz
SLP200 277 VAC, 0.6A, 50/60Hz
SLS100 PIR Motion Sensor
SLS200 Dual Photocell and PIR Motion Sensor
Class 1/2 dimming control: 0-10VDC
Indoor Locations
Controller Dimensions are 4 ¼" x 2 ¼" x 1" (LxWxH)
Sensor Dimensions are 2 ½" x 2 ½" x ½"
UL listed, CEC Database Listed
Five Year Warranty
Patented